Powered for What’s Next
Take on your next project with smoother, softer, smarter control. The Peak Solice Pro 3 machine is an upgraded powerhouse that delivers softer hits, improved balance, and quieter operation, so you can focus on clean lines and buttery shading without excessive vibration. Featuring an ergonomic grip and refined weight distribution, you’ll notice the difference from the first pass to your final wipe.
Adjust your stroke for any technique. The expanded 2.5–4.5mm adjustable stroke range lets you switch from lining to shading to packing, so you can tackle any project with one machine.
Work longer with confidence using the upgraded 2000mAh battery built for extended sessions. Designed to deliver up to 10 hours of runtime (depending on usage), this improved power system keeps up with demanding schedules while recharging in about 1.5 hours. The larger full-color TFT display makes it easy to monitor your settings at a glance, so you stay dialed in without slowing down.
Speed up your workflow and streamline your setup by pairing your Solice Pro 3 with D(1mb) (opens in a new window)arklab ErgoShield grips(1mb) (opens in a new window), which cut your setup time down to 10 seconds flat. The Solice Pro 3 also works with the Peak Radix Footswitch(1mb) (opens in a new window) and all previous Solice Pro batteries. With included accessories like an RCA module, USB-C charger, and Solice Pro 2 battery adapter, you’re ready to run it wired or wireless straight out of the box.
Technical Specifications:
-
Weight: 252g (with battery)
-
Length: 144mm
-
Width: 33–36m
-
Stroke Length: Adjustable 2.5–4.5mm
-
Voltage Range: 5–12V
-
Frequency Range: 58–132Hz
-
RPM Range: 3,600–7,60
-
Motor Type: Brushed coreless
-
Battery Capacity: 2000mAh
-
Runtime: Up to 10 hours (varies depending on useage)
-
Charge Time: ~1.5 hours
- Display: 1.2” full-color TFT screen
| O-Ring Specification | Application / Location |
| 26 × 24 × 1 mm | Used to secure the battery holder |
| 26 × 28.4 × 1.2 mm | Used on the upper housing |
| 16 × 14 × 1.0 mm | Used on the transmission fixing component |
| 27 × 24 × 1.5 mm | Used on the motor cover |
| 24 × 21 × 1.5 mm | Used on the adjustment housing |
| 32 × 30 × 1.0 mm | Used on the top of the motor cover |
| 17.4 × 15 × 1.2 mm | Used on the front of the motor cover |
